The selected CoolTeck coverage rules are retained from the detailed design. Sensors are placed at calculated X/Y/Z coordinates and wired gateways are mounted on a practical room side/wall at an accessible height, selected to reduce installed cable routing. Final installation coordinates remain tied to REF O.
Representative Placement Example — Freezer 2
Example exact coordinates
| Device | Type | X | Y | Z | Wall / assignment |
|---|
| WG-01 | Gateway | 0 | 10 | 1.8 | Side A · A-01, A-02, A-03, A-04 |
| WG-02 | Gateway | 6.5 | 0 | 1.8 | Side B · B-01, B-02, DR-01, B-04 |
| WG-03 | Gateway | 14.8 | 10 | 1.8 | Side C · C-01, C-02, C-03, C-04 |
| WG-04 | Gateway | 5.6 | 20 | 1.8 | Side D · D-01, D-02, ER-01, ES-01 |
| A-01 | Sensor | 0 | 5 | 3 | WG-01 |
| A-02 | Sensor | 0 | 5 | 6 | WG-01 |
| A-03 | Sensor | 0 | 15 | 3 | WG-01 |
| A-04 | Sensor | 0 | 15 | 6 | WG-01 |
| B-01 | Sensor | 3.7 | 0 | 3 | WG-02 |
| B-02 | Sensor | 3.7 | 0 | 6 | WG-02 |
| DR-01 | Sensor | 9.2 | 0 | 3 | WG-02 |
| B-04 | Sensor | 11.1 | 0 | 6 | WG-02 |
| C-01 | Sensor | 14.8 | 5 | 3 | WG-03 |
| C-02 | Sensor | 14.8 | 5 | 6 | WG-03 |
| C-03 | Sensor | 14.8 | 15 | 3 | WG-03 |
| C-04 | Sensor | 14.8 | 15 | 6 | WG-03 |
| D-01 | Sensor | 3.7 | 20 | 3 | WG-04 |
| D-02 | Sensor | 3.7 | 20 | 6 | WG-04 |
| ER-01 | Sensor | 7.4 | 20 | 3 | WG-04 |
| ES-01 | Sensor | 7.4 | 20 | 6.7 | WG-04 |
Conclusion
This short report summarizes the project design for management and site review. The detailed report and wiring package remain the controlling installation outputs for individual cable runs and exact room-by-room coordinates.